Roll forming machines for support ring and tube end processing

Metallrohr mit geformtem ORFS-Rohrende nach der Bearbeitung auf einer Rohrumformmaschine.

NEW - t form FLARELINE 28 with automatic ORFS ring feeder

ERROR ASSEMBLY

EXCLUDED!

ORFS CONNECTIONS MANUFACTURED SEMI-AUTOMATICALLY

t form FLARELINE 28 Rohrumformmaschine mit automatischer Ringzuführung und Beispiel eines geformten ORFS-Rohrendes.

t form FLARELINE ROLLING FORMING MACHINE

For safe, effective and cost-efficient ORFS connections.

With the semi-automatic ORFS ring feeder, transfluid has developed a cost-effective solution for the safe and effective production of small, medium and even large batch sizes.

Feeding via a magazine with a poka-yoke system prevents incorrect assembly, which guarantees consistently high quality.

Short cycle times make assembly more economical and the automated solution significantly reduces the workload of the machine operator. Machine instruction and training can be reduced to a minimum.

transfluid t form FLARELINE 28 Rohrumformmaschine mit automatischer ORFS-Ringzuführung und zwei Bedienern.

TubeTalk episode 3

NEW - t form FLARELINE 28 with automatic ORFS ring feeder.

In our latest TubeTalk video, Yannick and Sharif present our t form FLARELINE 28 with the new, optional, automatic ORFS ring feeder in detail.

The advantages

AUTOMATIC LOADING

ORFS rings always 100% in the correct position.
COMPACT DESIGN

Straight or curved geometries with minimal collision points.
ELECTRICALLY ADJUSTABLE LENGTH STOP

Adjustable stop to determine the flare size. For electronic length control of the pipe before the machining process.
SIMPLE CONTROL VIA TOUCH PANEL

All parameters are set centrally in the machine control system, controlled positioning of the forming axis and the stop position.
TOOL CHANGE

Uncomplicated conversion to all ring and pipe diameter sizes.
ERROR-FREE OPERATION

Massive relief for the machine operator.
PERFECT RESULTS

This creates perfect, mirror-smooth sealing surfaces.

Images 1/0

Automatische t form FLARELINE 28 Rohrumformmaschine mit Magazin und Rohrbearbeitungssystem.

SIMPLE CONTROL VIA TOUCH PANEL

All parameters are set centrally in the machine control system, controlled positioning of the forming axis and the stop position.

The t form FLARELINE is equipped with fully electronic pre-selection of the flanging geometry. The stop position as well as all strokes and machining operations are servo-electrically controlled and can be called up via a touch panel.

The material used and the shape to be achieved are decisive for the exact processing time. The machine carries out the processing virtually automatically if it is possible to call up the pipe size with the necessary process parameters. In some cases, the clamping lengths for processing are 1 to 1.5 times the pipe diameter.

Our new generation of t form FLARELINE 28, 42 and 115 machines reduces the set-up time for tool changes and the operator can set up the machine in less than three minutes.

Watch movie