#HM19 – Focus on diversity for hydraulics

The software makes the processes reliable with collision tests before the actual bending.
The software makes the processes reliable with collision tests before the actual bending.

Connection systems and tubing for hydraulics need flexible technology for tube bending, in order to have strong, clean results and long-lasting seals. At the Hannover Messe, Hall 21, Stand H38 we will show you which solution is the best for each specific requirement: it can be a simple bending machine for bending directly on site, or bending machines controlled with connected software and CNC.

@HM19 transfluid®-keynote lecture
Gerd Nöker from transfluid will report at the Hannover Messe 2019 on the topic of "Automatic chipless forming of one-piece hydraulic hose end fittings" on 3rd April 2019, 11:30 – 12:00, at the "Motion & Drives“ forum, in the „Predictive Maintenance / Smart Manufacturing“ block.

Here are a couple of exciting options that we would like to talk to you about:

Mobile work on site
With just one square meter standing surface needed, this efficient technique gives you flexibility. With the latest generation of the classic tube bending machine t bend MB462 it is possible to bend tubes up to 6 meters long and diameter of 6-42mm on site. The bending radius is between 2x and 2.5x the diameter of the tube. In the case of tubes with very thin walls it is 3x the diameter. Our mobile bending machine comes with additional equipment, such as assembly devices for all the most common connection systems (flaring 37° and 90 °or with cutting ring), saws, internal and external deburring devices and metal circular saw.

For a tight bending radius
We have developed our compact bending machine with mandrel for the manufacturing of tube geometries for single pieces or small series, with the rotary draw bending technique. It is possible to have a tight bending radius with tubes with thin walls too, when using a mandrel. For instance, it is possible to manufacture tubes with a diameter 6mm to 42 mm or 20-76mm with our t bend DB 642K or DB 2076K. If needed, it is possible to transfer data to the machine via the USB connection. An 8-angle pre-selection is included as standard and bending programs can be stored in the control system.

A variety of geometries and interfaces
When you have to manufacture complex tubes or you need to process CAD data from programs online, the solution is our fully-automated CNC machines, which are easy to use and perform strongly. The change of tools is fast and their use extremely flexible. They can be connected to CAD-software and measuring devices with the appropriate interface. With their price/performance ratio there is a strong economical benefit with small series and the variety of geometries that can be produced independent of the user.

Digitally connected
Our t project software helps you to improve your processes and make the production safer. Available in two versions, it makes controlled manufacturing and connection to different measuring systems possible. In addition to that, it is possible to test the planning and collision-free execution in advance.

Separate assembly
In addition to our bending machine we are offering separate solutions for flange or cutting ring connections. These assembly machines operate in an axial or rolling way, like the desktop combination unit HA 642 for tubes with a 6-42mm diameter.
We are happy to present the different solutions to you in person at the Hannover Messe.

We are looking forward to seeing you.

Go back

transfluid®
Maschinenbau GmbH

Hünegräben 20-22
57392 Schmallenberg
Germany

sales@transfluid.de

+49 29 72 / 97 15 0

+49 29 72 / 97 15 11